Steel mesh is a kind of steel mesh product welded by our factory. It is a steel mesh composed of longitudinal and transverse steel bars arranged at a certain distance and right angle. All intersections are welded together by strong resistance pressure.

　　鋼筋焊接網是被國內老爺爺視為一種新型、、的鋼筋混凝土結構施工鋼，廣泛應用于工民房地板、屋面、墻體、地板、混凝土路面、橋梁路面、機場跑道、隧道襯砌、混凝土管道、樁等方面。

　　Welded steel bar net is regarded as a new type, high efficiency and high quality construction steel of reinforced concrete structure by old grandfather in China. It is widely used in floor, roof, wall, floor, concrete pavement, bridge pavement, Airport runway, tunnel lining, concrete pipeline, pile, etc.

　　鋼筋混凝土焊接鋼網的技術性能及優點:

　　Technical performance and advantages of reinforced concrete welded steel mesh:

　　1、可大大減少鋼材安裝時間，比裝訂網少勞動50%—70%。

　　1. It can greatly reduce the installation time of steel products, 50%-70% less labor than the binding network.

　　2. 由于鋼筋間距相對較近，焊接網絡的縱向和橫向鋼筋形成網狀結構，相互粘結和錨固在一起，有利于防止混凝土裂縫的產生和發展。安裝在路面、地板和地板上的焊接網可使混凝土表面的裂縫減少約75%。

　　2. Because of the relatively close spacing of reinforcing bars, the longitudinal and transverse reinforcing bars of the welding network form a network structure, which binds and anchors each other, which is conducive to preventing the occurrence and development of concrete cracks. Welding mesh installed on pavement, floor and floor can reduce cracks on concrete surface by about 75%.

　　3、特別適用于大面積混凝土工程、焊接網篩孔尺寸非常整潔,遠遠超出了手動綁定網絡,嚙合剛度、彈性好,澆注混凝土鋼筋不容易局部彎曲,變形和滑動現象,混凝土保護層厚度易于控制,制服,顯著提高鋼筋混凝土工程的質量。

　　3. It is especially suitable for large area concrete engineering and welding screen hole size is very neat, far beyond manual binding network, meshing stiffness, good elasticity, cast concrete reinforcement is not easy to local bending, deformation and sliding phenomenon, concrete cover thickness is easy to control, uniform, significantly improve the quality of reinforced concrete engineering.

　　4,電焊網具有良好的綜合經濟效益,焊接網的設計鋼筋強度高于一級鋼筋(光面鋼筋焊接網)50% ~ 70%(竹節鋼筋焊接網),考慮一些結構要求后仍可以節省鋼材約30%,低于12毫米直徑分布鋼筋處理費用的約10%15%的原材料的成本。綜合考慮(與一級鋼筋相比)可使鋼筋工程造價降低10%左右。鋼筋焊接網是工廠內焊接的一種網狀鋼產品，是縱向和橫向鋼筋按一定的距離相互成直角排列，所有的交點都焊接在一起，具有很強的耐壓性。

　　4. Welded wire mesh has good comprehensive economic benefits. The design strength of welded wire mesh is 50%-70% higher than that of first grade steel (smooth steel wire mesh). Considering some structural requirements, it can still save about 30% of steel and about 10% to 15% of the cost of raw materials for treatment of steel bars with diameter distribution less than 12 mm. Considering comprehensively (compared with the first grade reinforcement), the cost of reinforcement engineering can be reduced by about 10%. Welded steel mesh is a kind of mesh steel products welded in factories. It is arranged at right angles between longitudinal and transverse steel bars according to certain distances. All intersections are welded together, which has strong pressure resistance.