Steel fabric is used in industry and building, but when using steel fabric, the total number of steel fabric should be calculated first, so that there will be no problem in the use process. However, the requirement of calculating the reinforcement net must also be the criterion, so what kind of criterion is the reinforcement net?

　　鋼網是將鋼絲通過電焊或編織加工成的網，除焊接鋼網、壓花鋼網、鉤鋼網三種。外墻柱用鋼網片計算規范:若柱截面小于墻厚，墻內柱不用鋼網片計算。

　　Steel mesh is a kind of mesh made of steel wire by electric welding or weaving, except for welded steel mesh, embossed steel mesh and hook steel mesh. Code for calculation of steel mesh for outer wall column: if the section of column is less than the wall thickness, steel mesh is not used for calculation of inner wall column.

　　考慮原外柱鋼網長度扣除梁的高度和板的厚度(包括分層梁和板)。扣梁、板高度根據墻梁、板實際相交高度墻梁。鋼筋網板計算準則:墻梁鋼筋網板原長度按原數量計算，并扣除柱和結構柱。2. 梁與板的交點為梁頂標高與板頂標高水平。

　　The height of the beam and the thickness of the slab (including the layered beam and slab) are deducted from the length of the original outer column steel mesh. The height of buckle beam and slab is based on the actual intersection height of wall beam and slab. Calculation criteria of reinforced mesh: the original length of reinforced mesh of wall beam is calculated according to the original quantity, and column and structural column are deducted. 2. The intersection of beam and slab is the elevation level of beam top and slab top.

　　如果梁邊緣在墻上,不含墻水平,這條邊不計算的外墻,指責(墻上的條件不封頂),和董事會的梁相交,則安置3,如果梁不交叉與董事會,則安置4。畢竟，無論如何使用鋼筋網都需要掌握其核算方法，只要能夠正確使用鋼筋網的核算方法。

　　If the edge of the beam is on the wall, excluding the level of the wall, and this edge is not calculated for the external wall, blame the top layer (the condition of the wall is not capped), and intersect with the beam of the board of directors, place 3; if the beam is not intersected with the board of directors, place 4. After all, no matter how to use the steel mesh, we need to master its accounting method, as long as we can correctly use the accounting method of the steel mesh.