The production and installation of steel mesh confirm these data. Reinforcing mesh is a kind of reinforcing mesh that arranges the longitudinal and transverse reinforcing bars according to a certain distance and angle, and all welding points are welded together.

　　1. 帶鋼的厚度誤差是常見的鋼鐵生產,這個誤差范圍很難控制在生產工程中,主要是因?yàn)榈倪^程,磨料磨具的磨損(基本類型的組件失敗),導致鋼的錯誤,這是不容易控制,但是在這個0。25毫米的射程是可以控制的，超過這個范圍就會引起懷疑。

　　1. The thickness error of strip steel is a common steel production, and this error range is difficult to control in production engineering, mainly because the final process, abrasive wear (basic type of component failure), leads to steel errors, which is not easy to control, but in this 0. A range of 25 mm is controllable, beyond which doubt arises.

　　2. 鋼筋網適用于工廠生產，用冷軋帶肋鋼或冷軋圓鋼焊接而成，是一種良好、的混凝土配合比材料。鋼(英語:鋼筋)凈形狀大小5毫米,誤差范圍是原板在切割過程中,如果做了,在錯誤不會影響鋼結構的安裝鋪設,如果大于錯誤,可能空間,或者不能購物,但是我們公司,經過多年的經驗,基本已經控制誤差范圍在1 - 2毫米。

　　2. The steel mesh is suitable for factory production and welded with cold-rolled ribbed steel or cold-rolled round steel. It is a good and efficient concrete mix material. The net shape and size of steel (English: steel bar) are 5mm, and the error range is the original plate in the cutting process. If it is done, the error will not affect the installation and laying of steel structure. If it is larger than the error, it may be space, or it can not be purchased. However, our company, after years of experience, has basically controlled the error range of 1-2mm.

　　3.對角線誤差:這種誤差主要是由于制鋼過程中，擠壓，或塑料修理引起的熱量不均造成的。

　　3. Diagonal error: this error is mainly caused by uneven heat caused by extrusion or plastic repair during steel making.

　　4,。鋼網的平整度是由鋼網焊機的壓力焊接工藝引起的。安裝固定后，鋼網完全保持平整。另外，我公司采用大型鋼筋網壓焊機，馬華鋼、扁鋼的平整度均小于0。5mm也是焊接質量(目標目標)的重要指標。

　　4, The flatness of the steel mesh is caused by the pressure welding process of the steel mesh welder. After installation and fixation, the steel mesh shall be completely flat. In addition, our company adopts large-scale steel mesh pressure welding machine, and the flatness of Mahua steel and flat steel is less than 0. 5mm is also an important index of welding quality (target).

　　上面的鋼筋網標準是基于目前的鋼網行業的生產力,以及材料的物理性質、安裝條件,使用綜合考慮鋼網產品的配方,只要標準中的數據以滿足誤差范圍能滿足使用。熱齒鋼網類型:

　　The above steel mesh standard is based on the current productivity of the steel mesh industry, as well as the physical properties and installation conditions of materials. The formula of steel mesh products is comprehensively considered, as long as the data in the standard can meet the error range. Type of hot tooth steel mesh:

　　，經過普通扁鋼的承載槽、扁鋼的單杠壓縮鎖緊成形。鋼筋網適用于工廠生產，用冷軋帶肋鋼或冷軋圓鋼焊接而成，是一種良好、的混凝土配合比材料。普通型熱網格的噴嘴高度為100mm，熱網格的長度一般小于2000mm。

　　First of all, the bearing groove of ordinary flat steel and the horizontal bar of flat steel are compressed and locked. The steel mesh is suitable for factory production and welded with cold-rolled ribbed steel or cold-rolled round steel. It is a good and efficient concrete mix material. The nozzle height of ordinary hot grid is 100mm, and the length of hot grid is generally less than 2000mm.

　　二世。整體軸承扁鋼與棒材扁鋼具有相同的高度，切削深度為軸承扁鋼的一半。熱齒鋼網高度不得大于100mm。熱齒鋼網的長度一般小于2000mm。

　　II. The overall bearing flat steel has the same height as the bar flat steel, and the cutting depth is half of the bearing flat steel. The height of hot tooth steel mesh shall not be greater than 100mm. The length of hot tooth steel mesh is generally less than 2000mm.

　　遮陽承重扁鋼開30度或45度溜槽，槽干扁鋼鎖槽成型。根據不同的需要可選用其它間距、規格的熱鋼筋(鋼筋)網，可選用普通碳鋼、不銹鋼、mate等材料。熱鋼網高度小于100mm

　　The sun shading bearing flat steel shall be provided with 30 degree or 45 degree chute, and the groove dry flat steel lock groove shall be formed. According to different needs, other spacing and specifications of hot steel (reinforcement) mesh can be selected, and ordinary carbon steel, stainless steel, mate and other materials can be selected. Height of hot steel mesh is less than 100mm

　　四、重型熱軋鋼網由高扁鋼和扁鋼相互咬合，在1200噸的壓力下壓縮成型。適用于大跨度承載場合。

　　4、 The heavy-duty hot-rolled steel mesh is made of high flat steel and flat steel which are interlocked with each other and compressed under the pressure of 1200 tons. It is suitable for large-span bearing occasions.